K10CKIT

Antifreeze heating cable kit with constant antifreeze power

• 
• 
• 
• 

K10CKIT FOR MORE INFO

• 
• 

• DESCRIPTION
• TECHNICAL SPECIFICATION
• HOMOLOGATION AND INSTALLATION
• TECHNICAL LITERATURE

• DESCRIPTION
  0

  Kit consisting of a heating cable complete with a contact thermostat and power cable with Schuko plug.

  Constant power delivered ~10 W/m.

  Avoid possible damage caused by low temperatures on pipes, valves, taps, water meters, water troughs, vessels and small tanks.

  General features

  • Cable composition: thermoplastic material with a mechanical protection and earth braiding and an external protective sheath
  • Cable diameter 9 mm
  • Cable length:
    – K10C3KIT 3 m
    – K10C6KIT 6 m
    – K10C9KIT 9 m
    – K10C14KIT 14 m
  • Maximum room temperature powered 65 ° C
  • Minimum installation room temperature -5 °C
  • Thermostat temperature scale ON +5°C / OFF +15°C
  • Minimum storage room temperature -20 ÷ -25°C
  • Protection rating IPX7

  Electric features

  • Power supply 230V-50Hz
  • Constant power delivered ~10W/m
• ADVANTAGES
  0

  Kit consisting of a heating cable complete with a contact thermostat and power cable with Schuko plug.

  Constant power delivered ~10 W/m.

  Avoid possible damage caused by low temperatures on pipes, valves, taps, water meters, water troughs, vessels and small tanks.

  Advantages
• TECHNICAL SPECIFICATION

  CODE	CABLE LENGTH	MINIMUM INSTALLATION TEMPERATURE	MAXIMUM TEMPERATURE POWERED	MAXIMUM TEMPERATURE NOT POWERED
  K10C3KIT	3 m	-5°C	65°C	65°C
  K10C6KIT	6 m	-5°C	65°C	65°C
  K10C9KIT	9 m	-5°C	65°C	65°C
  K10C14KIT	14 m	-5°C	65°C	65°C

• HOMOLOGATION AND INSTALLATION
  Homologation

  • Compliant with Directive 2014/35/EU;
  • Complying with Standard EN60335-1;
  • CE

  Installation and use

  • The cable is ready for use: it has a Schuko plug to connect directly to the mains and a thermostat (+5°C to +15°C);
  • Thanks to the electric socket and the thermostat, installation is simple, safe and fast;
  • Secure the pipe with the relevant fixing tape: code K50 for steel pipes or code K50AL for plastic pipes;
  • The cable must be as long as the piping;
  • In the case of large pipes, the spiral cable may need to be wound so as to ensure adequate heat, taking care not to overlap it at any point;
  • It is advisable to apply an insulating coating over the heating cable for a correct installation.

  • The cable is ready for use;
  • The cable is actuated when the contact temperature drops below +5°C and automatically goes off when the temperature exceeds +15°C;
  • It consists of a resistance wound in a spiral on two conductors and in contact with these at junction points at constant intervals (the energy to heat the resistance is drawn at the splicing points).

   

  ACCESSORIES

  • Code K50: fiberglass fixing tape for metal pipes
  • Code K50AL: fixing tape for plastic pipes
  • Code KFAN: labels for the presence of a heating cable
• TECHNICAL LITERATURE
  • K10CKIT EN technical data sheet
  • BIM Object K10C3KIT
  • BIM Object K10C6KIT
  • BIM Object K10C9KIT
  • BIM Object K10C14KIT
• FAQS