IM

Control coils for solenoid valve bodies, IM2 series

• 

IM FOR MORE INFO

• DESCRIPTION
• TECHNICAL SPECIFICATION
• HOMOLOGATION AND INSTALLATION
• TECHNICAL LITERATURE

• DESCRIPTION
  0

  Control coils for solenoid valve bodies, IM2 series

  General features

  • All coils are made of copper wires of class H (180°C).
  • 30% glass fibre thermoplastic housing, insulation class F (155°C) suitable for continuous operation (100% ED).
  • Protection degree IP65.
  • Maximum ambient temperature 50°C.

   

  COIL CONNECTOR code: 1578501

  • Quick connection connector DIN 43650,  suitable for all IM2 coils.
  • Cable gland Pg9 (cable diameter 6÷8 mm).
  • Pg11 cable gland thread;
  • Adjustable cable outlet in 4 positions every 90°.

  Electric features

  • Operating limit ±10% COILS ca.
    -5% ÷ +10% COILS cc.
  • Electrical connections on terminals for connector 2P + ground.
• ADVANTAGES
  0

  Control coils for solenoid valve bodies, IM2 series

  Advantages
• TECHNICAL SPECIFICATION

  CODE	SUITABLE FOR	POWER SUPPLY	COIL ABSORPTION START VA	ACTIVE POWER W
  IM21F	M20 - M23	24 Vac 50/60Hz	25	9
  IM21H	M20 - M23	115 Vac 50/60Hz	25	9
  IM21M	M20 - M23	230 Vac 50/60 Hz	25	9
  IM21D	M20 - M23	12 Vac 50/60 Hz	25	9
  IM22	M20 - M23	24 Vdc	-	12
  IM22A	M23	12 Vdc	-	14
  IM29A	M29	12 Vac 50/60 Hz	33	12
  IM29F	M29	24 Vac 50/60Hz	33	14
  IM29M	M29	230Vac 50/60Hz	33	14
  IM30A	M29	12 Vdc	-	16

• HOMOLOGATION AND INSTALLATION
  Homologation

  • Complies with EN 60335-1, EN60730-2-8 standards.

  Installation and use

  • With IM21 coils used at 60 Hz, pressure values indicated in the table will be reduced with an average of 12%.
  • With IM22 coils used in d.c., pressure values indicated in the table will be reduced by 60%.
  • With IM29 coils used at 60 Hz, pressure values indicated in the table will be reduced with an average of 12%.
• TECHNICAL LITERATURE
  • IM EN technical data sheet
• FAQS