ECOCOMFORT PLUS

Single room heat recovery unit with IR remote control

• 
• 
• 
• 
• 

ECOCOMFORT PLUS FOR MORE INFO

• DESCRIPTION
• TECHNICAL SPECIFICATION
• HOMOLOGATION AND INSTALLATION
• TECHNICAL LITERATURE

• DESCRIPTION
  1

  ECOCOMFORT PLUS is a ventilation system that allows you to always have a change of clean air in indoor environments, without the need to open the windows, also preventing the formation of humidity and mould.
  A high-efficiency regenerative ceramic heat exchanger, placed inside the unit, accumulates the heat released by the air flow extracted from the room and returns it by heating the air during the intake cycle, thus recovering the output heat and avoiding energy waste.

  ECOCOMFORT PLUS is equipped with an ISO COARSE efficiency class filter which retains any impurities from the air released into the environment and a low consumption brushless DC motor controlled by a microprocessor which processes the information from the sensors present on the unit: temperature, VOC (Volatile Organic Compounds), humidity and light brightness. All these sensors allow the unit to adopt the most suitable ventilation modes automatically and ensure the best environmental comfort.

  The remote control allows for simple and intuitive configuration during installation and easy use by the end user. Infrared (IR) technology allows immediate communication with the device and the user can easily manage the sensors with which the unit is equipped and obtain information regarding the current operating mode. By installing multiple ECOCOMFORT PLUS units, a single remote control will be enough to control them all.
  ECOCOMFORT PLUS is available in two diameters (100 mm and 160 mm) and must be installed on the perimeter walls.

  General features

  FEATURES
  ■ Body made in antistatic ABS plastic;
  ■ Operating temperature -20 ° C to 50 ° C;
  ■ Compact dimensions and easy to install;
  ■ Telescopic body to fit every wall thickness;
  ■ External grille easy to install either from indoor or outdoor;
  ■ ISO Coarse filter;
  ■ Flow rectifier to grant higher performances, only for 160mm models (AP19993);
  ■ Infrared (IR) remote control
  ■ LED signaling in the lower part of the front body;
  ■ Temperature, VOC air quality, humidity and twilight sensors;
  ■ In compliance to UE Reg. 1254/2014

  KIT AP19993 and AP19989 include:
  ■ Ventilation unit complete with heat exchanger, telescopic tube and external grille; IR remote control.

  KIT AP199931 and AP199891 include:
  ■ Ventilation unit complete with heat exchanger, telescopic tube and external grille.

  HEAT RECOVERY UNIT
  ■ Ventilating unit with DC Brushless motor;
  ■ PVC shockproof telescopic body;
  ■ Ceramic heat exchanger with efficiency >90%;
  ■ Cross-linked polyurethane filter, ISO Coarse filtration class according to EN799;
  ■ Flow straightener to ensure higher performances, only for version with 160 mm diameter (AP19993);
  ■ Power supply 110V ÷ 230V~ 50/60Hz;
  ■ LED signaling in the lower part of the front body;
  ■ Temperature, VOC, humidity and brightness sensors;
  ■ Splash proof protection class: IPX4.

  ACCESSORIES AND SPARE PARTS:
  ■ Fan motor unit compatible with all ECOCOMFORT PLUS and ECOCOMFORT RF models;
  ■ External air inlet/exhaust terminal with rainproof and windproof grille;
  ■ ISO Coarse filter
  ■ IR remote control

  Electric features

  HEAT RECOVERY UNIT

  Power supply 110V ÷ 230V~ 50/60Hz
  INFRARED REMOTE CONTROL
  Power: 2 AAA batteries (not supplied)

• ADVANTAGES
  1

  ECOCOMFORT PLUS is a ventilation system that allows you to always have a change of clean air in indoor environments, without the need to open the windows, also preventing the formation of humidity and mould.
  A high-efficiency regenerative ceramic heat exchanger, placed inside the unit, accumulates the heat released by the air flow extracted from the room and returns it by heating the air during the intake cycle, thus recovering the output heat and avoiding energy waste.

  ECOCOMFORT PLUS is equipped with an ISO COARSE efficiency class filter which retains any impurities from the air released into the environment and a low consumption brushless DC motor controlled by a microprocessor which processes the information from the sensors present on the unit: temperature, VOC (Volatile Organic Compounds), humidity and light brightness. All these sensors allow the unit to adopt the most suitable ventilation modes automatically and ensure the best environmental comfort.

  The remote control allows for simple and intuitive configuration during installation and easy use by the end user. Infrared (IR) technology allows immediate communication with the device and the user can easily manage the sensors with which the unit is equipped and obtain information regarding the current operating mode. By installing multiple ECOCOMFORT PLUS units, a single remote control will be enough to control them all.
  ECOCOMFORT PLUS is available in two diameters (100 mm and 160 mm) and must be installed on the perimeter walls.

  Advantages
• TECHNICAL SPECIFICATION

  CODE	MODEL	Ø DN TUBE	SQM	SPEED	m³/h’	W max	POWER SUPPLY	dB(A) 1,5 mt
  AP19993	ECOCOMFORT PLUS 160	160 mm	35 mq (*)	low	28	2,8 W	110V ÷ 230V~ 50/60Hz	26
  				medium	33	5,2 W	110V ÷ 230V~ 50/60Hz	30
  				high	50	8,9 W	110V ÷ 230V~ 50/60Hz	36
  				sleep	15	1,6	110V ÷ 230V~ 50/60Hz	n.d.
  AP19989	ECOCOMFORT PLUS 100	100 mm	20 mq (*)	low	7	2,0 W	110V ÷ 230V~ 50/60Hz	18
  				medium	16	3,5 W	110V ÷ 230V~ 50/60Hz	23
  				high	26	5,0 W	110V ÷ 230V~ 50/60Hz	28
  				sleep	5	n.d.	110V ÷ 230V~ 50/60Hz	n.d.

   

  CODE	MODEL	Ø DN TUBE	SQM	SPEED	m³/h’	W max	POWER SUPPLY	dB(A) 1,5 mt
  AP199931	ECOCOMFORT PLUS 160 WITHOUT REMOTE CONTROL	160 mm	35 mq (*)	low	28	2,8 W	110V ÷ 230V~ 50/60Hz	26
  				medium	33	5,2 W	110V ÷ 230V~ 50/60Hz	30
  				high	50	8,9 W	110V ÷ 230V~ 50/60Hz	36
  				sleep	15	1,6	110V ÷ 230V~ 50/60Hz	n.d.
  AP19991	ECOCOMFORT PLUS 100 WITHOUT REMOTE CONTROL	100 mm	20 mq (*)	low	7	2,0 W	110V ÷ 230V~ 50/60Hz	18
  				medium	16	3,5 W	110V ÷ 230V~ 50/60Hz	23
  				high	26	5,0 W	110V ÷ 230V~ 50/60Hz	28
  				sleep	5	n.d.	110V ÷ 230V~ 50/60Hz	n.d.

  *based on:
  – air exchange equal to 0.5 Vol / h
  – local height 2.70 meters
  Calculation example: ambient surface x 2.70 meters x 0.5 Vol / h

  CODE	MODEL	For use with:
  AP6R6306151	PLUS 100 MOTOR FAN GROUP	for all ECOCOMFORT PLUS and ECOCOMFORT RF 100 models
  AP6R6306152	PLUS 160 MOTOR FAN GROUP	for all ECOCOMFORT PLUS and ECOCOMFORT RF 160 models
  AP6R6306150	ECOCOMFORT PLUS REMOTE CONTROL	for all ECOCOMFORT PLUS models
  AP19978	ISO COARSE SPARE FILTER – FR004	for all ECOCOMFORT models
  AP1612	RAINPROOF AND WINDPROOF GRILLE – GAP150	for all ECOCOMFORT 160 models
  AP19986	PREPARATION KIT	for all ECOCOMFORT 160 models
  AP19880	SOUND ABSORPTION SILENCER – SLF 150	for all ECOCOMFORT 160 models
• HOMOLOGATION AND INSTALLATION
  Homologation

  In compliance to UE Reg. 1254/2014

  Installation and use

  ECOCOMFORT PLUS must be installed on the external walls. Thanks to the telescopic body it fits easily every wall thickness with a minimum length of 24 cm.
  The external grille can be easily installed from outside or inside without the need of any scaffolding.
• TECHNICAL LITERATURE
  • ECOCOMFORT PLUS technical data sheet
  • ECOCOMFORT PLUS installation and use manual
  • ECOCOMFORT PLUS led signalling legend
  • ECOCOMFORT PLUS hoja de instrucciones
  • ECOCOMFORT PLUS feuille d'instructions
  • ECOCOMFORT PLUS Gebrauchsanweisungen
  • ECOCOMFORT PLUS instructies
  • ECOCOMFORT PLUS instrukcje
  • ECOCOMFORT PLUS инструкции
  • ECOCOMFORT PLUS οδηγίες
  • ECOCOMFORT PLUS navodila
  • ECOCOMFORT PLUS інструкція з експлуатації
  • ECOCOMFORT PLUS 100 energy label
  • ECOCOMFORT PLUS 160 energy label
  • Conformity EU Declaration
  • BIM Object AP19989
  • BIM Object AP19993
• FAQS