EC probes for electronic control units

Temperature probes for electronic control units

• 
• 
• 
• 
• 

EC probes for electronic control units FOR MORE INFO

• DESCRIPTION
• TECHNICAL SPECIFICATION
• HOMOLOGATION AND INSTALLATION
• TECHNICAL LITERATURE

• DESCRIPTION
  0

  Temperature probes are used for receiving the necessary information for the electronic control units operation.

  General features

  EC11-EC14 EXTERNAL PROBES

  • Case in thermoplastic material.
  • Linearized NTC thermistor heat-sensitive element.
  • Bipolar terminal board.
  • G1/4” cable gland

   

  EC12-EC15 CONTACT DELIVERY PROBES

  • Case in thermoplastic material.
  • Linearized NTC thermistor heat-sensitive element.
  • Bipolar terminal board.
  • G1/4” cable gland.
  • Plastic clamp that can be reused for fastening to the pipe.

   

  EC13-EC16 IMMERSION DELIVERY PROBES

  • Case in thermoplastic material.
  • Linearized NTC thermistor heat-sensitive element.
  • Bipolar terminal board.
  • G1/4” cable gland.
  • Metal protection sheath with G1/2 conical connection for pressure seal.

   

  EC17 WELL PROBE

  • NTC10K temperature probe.
  • Brass capsule 6x35mm. Double insulation bipolar cable (white-red inside, grey outward) with 2×0,35mm² cable section, length=1,5 meters.
  • Tinned terminals. Insulation: >100mohm @500vca.

   

  EC19 FLOOR PROBE

  • NTC10K temperature probe.
  • Nylon capsule 7x25mm.
  • Double insulation PVC bipolar cable (white outward) with 2×0,50 mm² or 2×0,35 mm² cable sections, length=3 meters.
  • Tinned terminals. Insulation: >100mohm @500vca.

   

  EC21 PROBE FOR SOLAR PANELS

  • Stainless steel capsule 3x60mm.
  • Bipolar cable in ptfe.
  • 2×0.15mm² cable section, length = 1.5 meters.
  • Terminals: previously insulated leads. Insulation: >20Mohm @500Vac.
• ADVANTAGES
  0

  Temperature probes are used for receiving the necessary information for the electronic control units operation.

  Advantages
• TECHNICAL SPECIFICATION

  CODE	PROBE TYPE	CONTROLLED LIQUID MAX. TEMPERATURE	FOR
  EC11	external probe	-40 ÷ 80°C	EV02F - EV05M
  EC12	contact flow probe	-40 ÷ 120°C	EV02F - EV05M
  EC13A	immersion flow probe	-40 ÷ 150 C	EV02F - EV05M
  EC14	external probe	-40 ÷ 80°C	EV83 - EV70D - EV80 - EV84A EV85 - EV87 - EV90 - EV91
  EC15	contact flow probe	-40 ÷ 120°C	EV60 - EV83 - EV70A - EV70D - EV80 - EV80E - EV84A EV85 - EV85E - EV87 - EV90 - EV91
  EC16A	immersion flow probe	-40 ÷ 150 C	EV60 - EV83 - EV70A - EV70D - EV80 - EV80E - EV84A EV85 - EV85E - EV87 - EV90 - EV91
  EC17	well probe	-30 ÷ 85 °C	EV60 - EV83 - EV70A - EV70D - EV80 - EV80E - EV84A EV85 - EV85E - EV87 - EV90 - EV91
  EC21	probe for high temperatures	-40 ÷ 280 °C	EV40

• HOMOLOGATION AND INSTALLATION
  Homologation

  • Complies with EN 60730-2-9 standard.

  Installation and use

  • EC11-EC14 EXTERNAL PROBES
    Install the external probe on the north or north-east side at the half-height of the building, away from protruding sections, windows, doors, ventilation grilles, etc.
  • EC12-EC15 CONTACT DELIVERY PROBES
    Install the contact probe on the water delivery pipe and downstream of the mixing valve, to a minimum distance of 1,50 meters from the valve and possibly after a pipe elbow. The contact probe should be mounted by interposing the heat conducting paste between the surfaces involved, while making sure adherence is good.
  • EC13A-EC16A IMMERSION DELIVERY PROBES
    Screw the probe into the curve provided on the water delivery pipe, downstream of the mixing valve with a minimum distance of 1,5 meters.

  • The temperature probes are the detectors through which the control units receive the necessary information for their operation.
  • The sensing element consists of NCT linearized thermistors, therefore no part is moving and isn’t subjected to mechanical wear.
• TECHNICAL LITERATURE
  • EC EN technical data sheet
• FAQS