ASPIRCOMFORT CLASS 620H WI-FI

Single room heat recovery ventilation unit for horizontal intallation with WiFi control.

• 

ASPIRCOMFORT CLASS 620H WI-FI FOR MORE INFO

• DESCRIPTION
• TECHNICAL SPECIFICATION
• HOMOLOGATION AND INSTALLATION
• TECHNICAL LITERATURE

• DESCRIPTION
  0

  Single room heat recovery unit ventilation for horizontal intallation with WiFi control, max flow rate 620 m3/h.

   

  General features

  ASPIRCOMFORT CLASS is a fan unit complete with heat recovery unit dedicated to air renewal without wasting energy.
  The unit is particularly suitable for single rooms where ducted systems are not possible.
  Thanks to its construction features and components, ASPIRCOMFORT CLASS 620H WI-FI is able to reach recovery
  efficiency of more than 90%.
  In the winter and summer seasons there is considerable energy recovery of the renewal air introduced into the room.

   

  • Self-supporting sheet metal frame with polyethylene
    insulated interior.
  • Polypropylene high efficiency cross flow counter current
    exchanger. Low freezing temperatures and operation
    down to -25°.
  • Brushless forward curved centrifugal fans with
    electronic motor and modulating control. Very high
    efficiency and low noise levels.
  • ePM1 70% filters with low head loss. Easily removable
    by removing the lower outer panels.
  • Free cooling inside the unit with generous air flow and
    damper with motorised actuator.
  • Management of 3 fan speeds + Auto.
  • WI-FI control unit with the possibility of management
    via App, equipped with sensors for monitoring
    temperature, relative humidity (RH%), volatile organic
    compound (VOC) concentration and carbon dioxide
    (CO2) concentration. Mandatory for operation (supplied
    separately).
  • The unit is equipped with a power cable with Shuko
    plug.
• ADVANTAGES
  0

  Single room heat recovery unit ventilation for horizontal intallation with WiFi control, max flow rate 620 m3/h.

   

  Advantages
• TECHNICAL SPECIFICATION

  Code 
  AP20048W

  Model
  ASPIRCOMFORT CLASS 620H WI-FI

  Description
  Heat recovery unit for horizontal installation with max. air flow rate of up to
  620 m3/h with Wi-Fi control (to be ordered separately – Cod. 1591008)

   

  Type of fans		Centrifugal blades forward directly coupled electronic motor - 0/10 V signal
  Number of fans	No	2+1
  Air flow rate V3/V2/V1	m3/h	620 / 355 / 165
  Useful pressure	Pa	15

• HOMOLOGATION AND INSTALLATION
  Homologation

  The CE marking (on each machine) certifies conformity with the following Community standards:

  • Low Voltage Directive 2014/35/EC
  • Electromagnetic Compatibility Directive 2014/30/EC
  • Ecodesign 2009/125/EC

  Installation and use

  ACCESSORIES

  • 2 connections Ø 250 mm
  • Insulated pad
  • 2 fixed grids Ø 250 mm for outside wall
  • Pre-wired 10 m cable for connecting Wi-Fi control

   

   

   

  Cod. 1591008 – CONTROL UNIT FOR ASPIRCOMFORT CLASS WI-FI (not included)

  • Smart Touch
  • Management of 3 fan speeds + Auto
  • WI-FI control unit and App
  • On-board sensors for temperature monitoring, relative humidity (RH%), volatile organic compound (VOC) concentration
    and carbon dioxide (CO2) concentration
  • Season setting
  • Temperature set point

  NOTE: supplied separately.

• TECHNICAL LITERATURE
  • AP20048W - Technical data sheet
  • AP20048W - Instruction manual for ventilation unit
  • 1591008 - Instruction manual for control unit
  • APP instruction manual
• FAQS