Flush mouting room thermostats for fan-coils with remote actuator
-
DESCRIPTION
General features0
CH130RR is a fan-coil thermostat that allows you to control the ambient temperature both in the heating and cooling modes.
Cover colours included: white, silver, anthracite
KIT WITH REMOTE RELAY MADE UP OF: CH130R THERMOSTAT + CH172D ACTUATOR
THERMOSTAT
- The packaging includes:
– 4 frames to provide compatibility with the most common plates
– 3 coloured covers,
– 3 special covers for Bticino Axolute and Ave Sistema 44, Eikon Evo,
– 3 pairs of coloured adapters,
– 1 pair of adapters for Bticino Matix.- Fan speed selection: 3 level manual (minimum, medium, maximum) and Auto;
- Suitable to control heating and air conditioning systems;
- Auxiliary input for window contact and / or minimum thermostat, input for external probe
- External probe distance 10 m max;
- Thermal gradient 4 K/h;
- Max actuator cable length 100m;
- Screw clamps;
Double insulation.
ACTUATOR
- Voltage-free switching contacts: 2 valve outputs
- Switching contacts at mains voltage: 3 motor contact outputs
- Container: IP00 (pollution degree 2)
- Class A software
- Maximum temperature T45
- Disconnection type 1B (microdisconnection)
Electric featuresTHERMOSTAT
- Power supply from remote actuator
- Remote actuator with 5 output relays, 250 Vac voltage
- Contact rating 5(3)A.
ACTUATOR
- Power supply 230V 50 Hz
- Power consumption 2VA
- Contact rating 5(3)A250 V~
- Impulse voltage 4000V
-
ADVANTAGES
0
CH130RR is a fan-coil thermostat that allows you to control the ambient temperature both in the heating and cooling modes.
Cover colours included: white, silver, anthracite
KIT WITH REMOTE RELAY MADE UP OF: CH130R THERMOSTAT + CH172D ACTUATOR
Advantages -
TECHNICAL SPECIFICATION
CODE KIT SPEED TEMPERATURE RANGE OPERATING TEMPERATURE POWER SUPPLY PROTECTION DEGREE CH133 Thermostat + remote actuator 3 speeds + auto 2 ÷ 40 °C 45 °C CH172D actuator IP20 -
HOMOLOGATION AND INSTALLATION
Homologation
- Complies with EN60730-1, EN60730-2-9.
- Complies with 2006/95/CE, 2004/108/CE, 1993/68/CE
- ErP: ErP Class IV; 2% (Reg. EU 811/2013 -813/2013)
Installation and useTHERMOSTAT
- Flush-mounting in 3-module 503 embedded boxes by means of 2 screws (supplied).
- Two-wire connection with the user.
- Install the thermostat at 1.5 meters above the floor, away from kitchens, heat sources, windows and doors.
COMPATIBLE PLATES
- Bticino Living International and Transizione Piana – Living Light Air – Light, Light tech – Axolute – Axolue Air – Matix
- Vimar Idea and Rondò – Plana and Eikon – Eikon Evo – Arké Tecnopolimero
- Gewiss Chorus One, Lux, Art
- Ave sistema 45: Zama, Banquise, Yes, Ral – Sistema 44: Zama, Personal, Tecnopolimero
- Legrand Cross, Vela quadra, Vela tonda
- ABB Elos – Mylos
ACTUATOR
- DIN rail mounted
- Product dimensions 6 modules from DIN rail 106x93x42mm
CH133 have 3 different operating modes:
- COMFORT: with the comfort operating mode, the thermostat regulates the heating or cooling installation operation in order to always keep the same prescribed comfort temperature;
- ECONOMY with the ECONOMY operating mode, the thermostat regulates the heating or cooling installation operation in order to always keep the same prescribed economy temperature;
- (OFF), this function can be achieved by setting the fan speed to zero. In this case, the thermostat does not perform the regulation. The system will switch OFF completely and on display will appear the message “OFF”.).
SUMMER-WINTER
- Suitable to control heating and air conditioning systems
FAN SPEED SELECTION
- Manual: fan speed can be set manually to free fixed levels (minimum, medium, maximum).
- Auto: if the speed is set in Auto, the thermostat sets automatically the appropriate speed according to the difference between the set-point and the ambient temperature.
- TECHNICAL LITERATURE
-
FAQS
