Single room heat recovery unit and wireless control
-
DESCRIPTION
General features0
The ECOCOMFORT-RF system is composed by one or more single-room high efficieny heat recovery units suitable for exterior walls installation. Thanks to the ceramic heat exchanger inside the unit, the heat of the extracted air is accumulated in the heat exchanger and released to the air flow in the intake cycle.The unit is equipped with a G3 filter.
Each ventilating unit is equipped with a DC brushless motor with low power cosumption controlled by a microprocessor which automatically sets the speed according to the temperature, humidity and light brightness readings of the sensors on board to ensure the best comfort.
Installation options: 1 “Master” unit with its remote control and up to 64 slave / additional units.
The remote control, thanks to its intuitive graphics, allows the user to set and modify the desired operating mode and to verify the setting status.
KIT AP19981 and AP19987 include: heat recovery unit, telescopic body, grille and RF remote control
HEAT RECOVERY UNIT AND EXTERNAL GRILLE
- Ventilating unit with DC motor;
- PVC shockproof telescopic body;
- Ceramic heat exchanger with efficiency >90%;
- G3 filter.
- RF range: 100 mt open air, 30 mt indoor
- Brightness and humidity sensors
- Temperature sensor (only Master unit);
- RF range: 100 mt open air, 30 mt indoor
- Splash proof protection class: IPX4
RF REMOTE CONTROL
- Touch keypad
- Feedback through 9 blu leds
- RF range: 100 mt open air, 30 mt indoor
- Protection class IP40;
- Battery operation life: about 18 months (2 x CR2032 included).
Electric featuresHEAT RECOVERY UNIT
- Power supply 230V~ 50Hz;
- 868 MHz transmission.
RF REMOTE CONTROL
- Power supply: 2 batteries type CR2032 (included);
- 868 MHz transmission.
-
ADVANTAGES
0
The ECOCOMFORT-RF system is composed by one or more single-room high efficieny heat recovery units suitable for exterior walls installation. Thanks to the ceramic heat exchanger inside the unit, the heat of the extracted air is accumulated in the heat exchanger and released to the air flow in the intake cycle.The unit is equipped with a G3 filter.
Each ventilating unit is equipped with a DC brushless motor with low power cosumption controlled by a microprocessor which automatically sets the speed according to the temperature, humidity and light brightness readings of the sensors on board to ensure the best comfort.
Installation options: 1 “Master” unit with its remote control and up to 64 slave / additional units.
The remote control, thanks to its intuitive graphics, allows the user to set and modify the desired operating mode and to verify the setting status.
Advantages -
TECHNICAL SPECIFICATION
CODE MODEL Ø
TUBEMAX AMBIENT DIMENSIONS* SPEED m³/h MAX ABSORBED POWER dB(A)
1.5 mtAP19981 ECOCOMFORT 160 RF MASTER 160 mm 50 m² * low 28 2.0 W 27 medium 48 3.8 W 32 high 68 6.6 W 38 sleep 15 – – AP19982 ECOCOMFORT SAT 160 RF SECONDARY HEAT RECOVERY UNIT 160 mm 50 m² * low 28 2.0 W 27 medium 48 3.8 W 32 high 68 6.6 W 38 sleep 15 – – CODE MODEL Ø
TUBEMAX AMBIENT DIMENSIONS* SPEED m³/h MAX ABSORBED POWER dB(A)
1.5 mtAP19987 ECOCOMFORT 100 RF MASTER 100 mm 22 m² * low 8 2.0 W 18 medium 18 3.8 W 23 high 30 6.6 W 28 sleep 4 – – AP19988 ECOCOMFORT SAT 100 RF SECONDARY HEAT RECOVERY UNIT 100 mm 22 m² * low 8 2.0 W 18 medium 18 3.8 W 23 high 30 6.6 W 28 sleep 4 – – * based on: air exchange equal to 0.5 Vol / h and local height 2.70 meters. Calculation example: ambient surface x 2.70 meters x 0.5 Vol / h.
By increasing the number of slave units it is possible to increase the coverage in square meters.CODE MODEL AP19978 Spare filter FR004 for all ECOCOMFORT AP19986 KIT COMMISSIONING PHASE for all ECOCOMFORT 160 AP1612 GAP 150 – RAIN AND WIND PROTECTION ANTIFACTER for all ECOCOMFORT 160 AP19880 SLF 150 – SILENCER for all ECOCOMFORT 160 -
HOMOLOGATION AND INSTALLATION
Homologation
- Complies with Reg. (UE) 1254/2014.
Installation and useECOCOMFORT RF must be installed on the external walls. Thanks to the telescopic body it fits easily every wall thickness between 24 and 53 cm.
The external grille can be easily installed from outside or inside without the need of any scaffolding.
-
TECHNICAL LITERATURE
- ECOCOMFORT RF EN technical data sheet
- ECOCOMFORT RF installation manual IT-EN-ES-FR-DE
- ECOCOMFORT RF installation manual IT-RU-ET-LT-LV-CZ
- ECOCOMFORT RF user manual IT-EN-ES-FR-DE
- ECOCOMFORT RF user manual IT-RU-ET-LT-LV-CZ
- ECOCOMFORT RF brochure EN
- ECOCOMFORT RF brochure RU
- ECOCOMFORT drilling template RF
- Conformity EU declaration
- ECOCOMFORT 100RF energy label
- ECOCOMFORT 160RF energy label
- BIM Object AP19981
- BIM Object AP19982
- BIM Object AP1997
- BIM Object AP19988
-
FAQS
